Honda HT 3810


Old 06-24-09, 09:29 PM
Thread Starter
Join Date: Sep 2008
Posts: 16
Unhappy Honda HT 3810

Hi everybody,

Last year I bought a Honda HT-3810 with the intention of fixing it . The mower ran fine it had issues with the deck and hence was parked, unfourtunately I did not really pay any attention to it and it was standing in the open with out any protection. Finally this year when I try to start it there is just a clicking noise without the engine turning over. I checked the plugs and even tried to jump start it but it won't crank. When I repeat the procedure by connecting a wire directly from the battery to the starter it tries to crank but will just try and then quit.

what can be done to get it running again?

Sponsored Links
Old 06-24-09, 10:26 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,819
Often times, the belt gets stuck to the engine pulley, keeping the engine from turning. Check and see.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes