Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Replaced carburetor


Jack B.'s Avatar
Member

Join Date: Jul 2003
Posts: 590
AL

06-26-09, 08:12 PM   #1  
Replaced carburetor

I replaced a carburetor and the new one is slightly different. It has a small vertical spring (the spring is less than 1/8" in diameter and approximately 1/2" long) on the choke lever which holds the choke plate in one of three positions. I need to remove the spring and wanted to know just how is it attached.

 
Sponsored Links
hopkinsr2's Avatar
Member

Join Date: Feb 2005
Posts: 1,561
Non-US

06-26-09, 11:40 PM   #2  
I think those little springs are just pressed in... It should just pull out with sidecutters,,,,, Roger

 
Search this Thread