wiring diagrams
#1
Member
Thread Starter
Join Date: Oct 2008
Location: TENNESSEE
Posts: 12
Upvotes: 0
Received 0 Upvotes
on
0 Posts
wiring diagrams
Where can I find the wiring diagram for a 15 horse B&S model 28N707, and a 18 horse B&S model 422707.
Thank you
Jack
Thank you
Jack
#2
I don't believe there is such a thing.... these engines don't have wiring harnesses in them or anything, just a couple electric components with plugs. The diagram usually goes with the equipment the engine is mounted on. What are you trying to figure out?
#4
A common place to hook this wire is the large post on the starter solenoid with the positive cable going to the battery.
BUT,
Do NOT cut the little pin connector off the end of this wire to hook it up, There is a diode next to this connector that keeps battery voltage from feeding back to the stator and burning it up.
Get the proper connector to plug into this wire then extend to the needed length to reach the starter solenoid post.
Good Luck
BUT,
Do NOT cut the little pin connector off the end of this wire to hook it up, There is a diode next to this connector that keeps battery voltage from feeding back to the stator and burning it up.
Get the proper connector to plug into this wire then extend to the needed length to reach the starter solenoid post.
Good Luck
#6
Any Briggs dealer will have or can get a wire pigtail to plug into the pin connector on the stator.....