craftsman 14 in chain saw

Reply

  #1  
Old 07-30-09, 06:04 AM
Member
Thread Starter
Join Date: Jul 2009
Location: georgia
Posts: 2
Unhappy craftsman 14 in chain saw

my chain saw keeps flooding out when in run position when in choke or half choke it runs fine please help i am not very good with carb.
 
Sponsored Links
  #2  
Old 07-30-09, 07:14 AM
Member
Join Date: May 2006
Location: Iowa!!!!!
Posts: 3,728
More than likely it isn't flooding, but starving. Probably needs a kit and not too hard to put in.

When the diaphragm gets older it gets a little stiffer and can't do its job. If you're not into that kind of stuff, though just have a shop do it. It shouldn't be too expensive.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes