McLane edger service manual


  #1  
Old 08-22-09, 03:47 PM
K
Member
Thread Starter
Join Date: Aug 2009
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
McLane edger service manual

I am putting a McLane 801-3rp series edger carburator together & need a picture of how the linkage goes together. Can anyone help me with this? Thanks
 
  #2  
Old 08-22-09, 06:42 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,093
Upvotes: 0
Received 0 Upvotes on 0 Posts
Kevin,

McLane didn't build the engine, If you post ALL numbers off the engine we can see exactly which carb and throttle control assembly you have. Then, I'm sure there's someone around that can lend a hand.....
 
  #3  
Old 08-23-09, 09:21 AM
K
Member
Thread Starter
Join Date: Aug 2009
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
Yea I know. It is a Briggs & Stratton 3 HP model #801-3RP. The numbers on the engine are : Model 80202 Type 1765 03 Code 91040103. Hope this helps. Thanks, Kevin
 

Last edited by Kevin c; 08-23-09 at 09:42 AM. Reason: additional info
  #4  
Old 08-23-09, 03:31 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,093
Upvotes: 0
Received 0 Upvotes on 0 Posts
OK Kevin,

I couldn't determine exactly which control assembly you had, Sooo..... Here's all of them, Just pick the one that looks like yours;








Good Luck
 
  #5  
Old 08-23-09, 06:40 PM
K
Member
Thread Starter
Join Date: Aug 2009
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
I got it going. Thanks for your help.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: