Carb linkage springs in B&S model 445677

Reply

  #1  
Old 08-23-09, 02:37 PM
Member
Thread Starter
Join Date: Aug 2009
Location: NC
Posts: 2
Carb linkage springs in B&S model 445677

Took the carb off to clean the bowl and jets. I should have taken a picture first, because now i can't figure out where those two springs go! Any help will be greatly appreciated.
Ken
 
Sponsored Links
  #2  
Old 08-23-09, 03:49 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,263
Ken,

Maybe this will help;






Good Luck
 
  #3  
Old 08-24-09, 03:20 PM
Member
Thread Starter
Join Date: Aug 2009
Location: NC
Posts: 2
31YTech
Thanks so much for your help. That diagram was so simple even I could understand it! Got everything back together and running. Unfortunately, it's running just like it was before I cleaned the carb and jets; rough. Back to the drawing board, I guess.
Again, I really appreciate your help.
Ken
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes