Ryobi BC30

Reply

  #1  
Old 09-07-09, 05:32 PM
Member
Thread Starter
Join Date: Sep 2009
Location: Connecticut
Posts: 1
Ryobi BC30

The pull rope on my BC30 is stuck after being pulled out while trying to start and won't retract. I unscrewed the engine from the shaft. How do I get to the rope to rewind it?
 
Sponsored Links
  #2  
Old 09-07-09, 11:13 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,819
Sometimes you can just bump the unit near the rope rewind sharply with a block of wood and it will retract if it's just stuck. If it's really jammed up, then you may need to remove the rewind and see what went wrong.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes