Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

tired belt


workinman's Avatar
Member
Join Date: Oct 2009
Posts: 5

10-12-09, 07:00 PM   #1  
tired belt

I have a 6.75 eager 1 rear drive mower am trying to replace drive belt,Iam wondering if the blade holder is pressed onto crankshaft.Tried a cheap puller but it justed bent.any guesses would be helpful

 
Sponsored Links
repair_guy's Avatar
New Member
Join Date: Apr 2004
Posts: 539
AL

10-12-09, 10:00 PM   #2  
Drive belt

Yes,the blade adapter does slide off the end of the crankshaft.(got a bolt holding it on),and then the belt gaurd comes off where you can get to the drive pulley & belt.

 
workinman's Avatar
Member
Join Date: Oct 2009
Posts: 5

10-13-09, 07:11 AM   #3  
tired belt

Thanks,I thought so will try penetrating fluid and a better puller.

 
  Reply
Thread Tools
Search this Thread