I am rebuilding a Briggs Flo-Jet (two piece) carb and needed to drill-out the "Emulsion Tube Bolt" and "Emulsion Tube" that runs through the lower half of the carb assembly.

I need to rebore the threads in the Carb to accept the "Emulsion Tube" and bolt.

Does anyone know the thread specs for the tube and bolt?

 

It's a 5/16, 32 threads per inch, got one at

Steve Stovner
360-629-6894
[email protected]

----ORDER SUMMARY----

Order Date: Monday, December 14, 2009 at 06:37:01
Invoice#: 1260797535

Item# Qty Cost ea. Product
***** *** ****** *****************
25644 1 $ 4.00 Tap,<!--0.3125--> 5/16-32 NEF (lot of 1) HSS GH1 Mod Bottom - EX

SubTotal: $ 4.00
Shipping: $ 4.95

I'm still working on my flo jet, can't get it to stop leaking!