Lawnmower: Tecumseh 3 1/2 hp repair
#1
Would appreciate advice with carburetor linkage placements and/or adjustments for Tecumseh Lauson Power Product 3-1/2 HP, model # SPRB-7, Super Bagger.
#2
Join Date: Feb 1998
Location: The Shake and Bake State USA
Posts: 9,927
Upvotes: 0
Received 7 Upvotes
on
6 Posts
Hi:Jill Davis
Not exactly sure what question here is?
Is the govenor linkage connected to the mower currently? If so, I do not reccomend any adjustments be made to it.
If your referring to the throttle linkage, on the engine, loosen the clamp that secure it, slide it forward until to the fully closed <OFF> position and resecure that clamp that holds it in place.
Hope this is the info your requesting.
Regards,
TomBartco
Not exactly sure what question here is?
Is the govenor linkage connected to the mower currently? If so, I do not reccomend any adjustments be made to it.
If your referring to the throttle linkage, on the engine, loosen the clamp that secure it, slide it forward until to the fully closed <OFF> position and resecure that clamp that holds it in place.
Hope this is the info your requesting.
Regards,
TomBartco