LawnBoy ST826 Axle Bolt Replacement


Old 02-11-10, 07:34 AM
Thread Starter
Join Date: Dec 2009
Location: Wisconsin
Posts: 2
LawnBoy ST826 Axle Bolt Replacement

I have an approx 20 year old LawnBoy ST826 snow blower. Recently the axle bolt snapped on one wheel. My thought is it snapped due to age / rust / etc... rather than on purpose like a shear bolt would. Is that thought correct?

I replaced it with a grade 8 bolt & nut combination so my thinking was I would be good for another 20 years. It wasn't until today that I questioned if something softer should have been used. Thoughts?
Sponsored Links
Old 02-11-10, 08:21 AM
indypower1's Avatar
Join Date: May 2009
Location: Lake Winnipesaukee, New Hampshire
Posts: 634
Grade 8 is fine for the axle.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes