Replacing engine on Trobuilt tiller

Reply

  #1  
Old 04-08-10, 07:40 PM
Member
Thread Starter
Join Date: May 2008
Location: Pillager Minnesota
Posts: 67
Replacing engine on Trobuilt tiller

Can anyone tell me how hard of a job it would be for me to replace a Briggs and straton 5.5 hp OHV intek 190 engine on my Troybuilt tiller model 21A-634F063. Is there much envolved to change out engines. Could someone briefly tell me the steps I would need to take..............Thanks Rick
 
Sponsored Links
  #2  
Old 04-08-10, 08:42 PM
indypower1's Avatar
Member
Join Date: May 2009
Location: Lake Winnipesaukee, New Hampshire
Posts: 634
Not much of a job. Remove the belts, choke & throttle cables, and unbolt the 4 bolts holding the engine on.
 
  #3  
Old 04-15-10, 08:00 AM
Member
Join Date: Dec 2007
Location: USA
Posts: 84
Originally Posted by ricklindquist View Post
Can anyone tell me how hard of a job it would be for me to replace a Briggs and straton 5.5 hp OHV intek 190 engine on my Troybuilt tiller model 21A-634F063. Is there much envolved to change out engines. Could someone briefly tell me the steps I would need to take..............Thanks Rick

Whats wrong with the old engine?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes