Tiller cord "snaps back"

Reply

  #1  
Old 05-17-10, 05:36 AM
Member
Thread Starter
Join Date: May 2010
Posts: 2
Angry Tiller cord "snaps back"

I'm not really sure the best word for it, but when I go to start my tiller the pull cord snaps back really hard when it starts. This has just started happening. Was wondering if anyone has any ideas. It's to the point where it pulls the handle right out of my hand.
 
Sponsored Links
  #2  
Old 05-17-10, 07:15 AM
indypower1's Avatar
Member
Join Date: May 2009
Location: Lake Winnipesaukee, New Hampshire
Posts: 634
Flywheel key is sheared which throws off the timing. Flywheel keys cost about $1.
 
  #3  
Old 05-17-10, 07:33 AM
Member
Thread Starter
Join Date: May 2010
Posts: 2
Thumbs up

Great and that will stop it from yanking the pull cord out of my hand... I'll give that a try.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes