push lawnmower safety flap

Reply

  #1  
Old 06-03-10, 11:07 AM
Member
Thread Starter
Join Date: Dec 2008
Location: USA
Posts: 69
push lawnmower safety flap

Yesterday my Craftsman push lawnmower caught and chewed up the rear "safety" flap as I was pulled it backwards. Actually surprised it hasn't happened sooner. Seems like a no brainer that the flap should be made so it can't reach the blade, but what do I know.

Wonder if I should replace this OEM or if there is an after market product that would work better, or just fuggitaboutit.

Any thoughts?
 
Sponsored Links
  #2  
Old 06-03-10, 04:44 PM
indypower1's Avatar
Member
Join Date: May 2009
Location: Lake Winnipesaukee, New Hampshire
Posts: 634
OEM is the only place you will find it. Last 1 I replaced was only about $12.
 
  #3  
Old 06-04-10, 08:59 AM
NEsportsfan's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Mar 2010
Location: Insanity
Posts: 361
Might be available at your town dump too, if someone else dropped off a dead lawnmower.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes