If anyone can tell me where i can get one, i'd really appreciate it. Its on a husqvarna lgt2654 garden tractor mower. The float needle valve was stuck so i took the carb off and removed the float bowl and pulled out the neddle valve with the small rubber tip, ( i don't know what would cause it to stick i tried spraying carb cleaner in it before taking it off but it did'nt work.) The only reason i need a diagram is because when i removed the float bowl an o-ring about the size of a nickle fell out on to the table and for the life of me i can't see where it goes... I'm wondering if instead of going in the carb it might have gone in the small hole where the vacummn hose goes thru the wall of the air cleaner housing (its about the same size) and fell out when i turned it over.....thanks guys for any help with this i'd really like to get this put back together....the model # is 445877,typeis o760 e1, and the code is 071018yg.....the name on the carb is NIKKI, And the number stamped on the carb is 792947 2667712-911.......Oren

Toro 20071 Front Wheel Drive. Need to replace transmission. How do you remove nut attaching the pulley? Have held pulley with a strap wrench so it would not turn. Nut and shaft continues to turn with pulley secure.