26hp b&s misses w/blades engaged

Reply

  #1  
Old 06-11-10, 04:13 PM
Member
Thread Starter
Join Date: Jun 2010
Location: jackson
Posts: 1
26hp b&s misses w/blades engaged

model 466777 replaced plugs, air filter, gas, one coil, adjusted valves, cleaned and checked carb as well as checked fuel solenoid. Mower starts and runs well through full throttle, but when blades are engaged begins to miss badly. It did this before all of the changes but worse.
 
Sponsored Links
  #2  
Old 06-12-10, 12:29 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,814
Does it have good compression on both cylinders? If so, I'd suspect a carb problem still.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes