Trouble with Troy-Bilt deck
#1
Member
Thread Starter
Join Date: Jul 2003
Location: Montevallo, Alabama
Posts: 577
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Trouble with Troy-Bilt deck
I own a 42" Troy-Bilt Bronco, model-13AV60KG011 and S/-1B059H20256 that was purchased 5/21/09. The other day I purchased a new grass bagger from a Lowes. My assembly went just fine until I started to mount the discharge chute on the deck. The deck in the bagger instruction booklet didn't look at all like mine. Where it showed 4 wheels...mine has only two. My deck was approximately 1" taller than the chute. When I returned the bagger, I noticed, on a new Bronco that the deck looked like the instruction booklet. Does anyone know the numbers on the one that would fit?
#2
You could browse through the manuals PDF Manual Web Archive
and see if one has the information for different serial numbers of your model.
The first parts list I checked showed a couple different decks that came on your model.
Just curious, have you asked Lowes to find you the right one?
Was the mower purchased at Lowes?
and see if one has the information for different serial numbers of your model.
The first parts list I checked showed a couple different decks that came on your model.
Just curious, have you asked Lowes to find you the right one?
Was the mower purchased at Lowes?
#3
Member
Thread Starter
Join Date: Jul 2003
Location: Montevallo, Alabama
Posts: 577
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Yes, the mower was purchased at Lowes. When I took the bagger back, I was in a real hurry and didn't talk to the sales person. I may go back and talk to them.