Husqvarna using to much gas????

Reply

  #1  
Old 08-15-10, 04:29 PM
Member
Thread Starter
Join Date: Jan 2005
Location: usa, nc
Posts: 252
Husqvarna using to much gas????

hi.. i have a husqvarna lt2654 about 2 yrs old. When i first got it i could mow my entire yard with a full tank and actually have a little left. But this spring i went to crank it and it would not start. i tapped the carb with a pc of wood and it fired up so i opened it up and cleaned the carb and unstuck the valve. But now it seems it is using way to much gas, and i can smell like unburned gas while i'm mowing. When i mowed last time i filled it up and then used another half tank to finish. appreciate any help, and btw i have checked for leaks and have none. It is briggs and stratton intek v-twin engine. thanks
 
Sponsored Links
  #2  
Old 08-15-10, 06:06 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,263
Sounds like the float needle valve isn't seating fully and causing a higher than normal fuel level in the bowl, I would start with replacing that along with the plugs which are probably black now and install a new fuel filter.


Good Luck
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes