Toro ccr 2450 Snowblower engine gallops
#1
12-22-10, 10:19 AM
Join Date: Dec 2010
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Toro ccr 2450 Snowblower engine gallops
Hi everyone,
My engine revs, then cuts, then revs etc... If it is under a load it is fine. I just put a new carb on it, new plug in it, and new gas. No change.
If I don't figure this out I may have to move to Texas, and nobody wants that. Esspecially Texas.
My engine revs, then cuts, then revs etc... If it is under a load it is fine. I just put a new carb on it, new plug in it, and new gas. No change.
If I don't figure this out I may have to move to Texas, and nobody wants that. Esspecially Texas.
#3
12-22-10, 10:44 AM
Join Date: Dec 2010
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
.
#5
12-27-10, 03:58 AM
Member
Join Date: Apr 2005
Location: Pennsylvania
Posts: 105
Upvotes: 0
Received 0 Upvotes
on
0 Posts
My CCR2000 does the same thing to some degree. Since it runs well under load, I would leave it alone.
