Craftsman Snowthrower 536.884220 Belt Tensioner Spring
#1
Member
Thread Starter
Join Date: Jan 2011
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Craftsman Snowthrower 536.884220 Belt Tensioner Spring
How should the spring be installed?
Snowthrower stopped throwing snow. Opened up the side of the machine the belt is on. Belt had no tension. Spring was unattached at one end. Belt tensioner was loose. I don't see how the spring would be attached to provide sufficient tension to the belt. It seems to not fit properly in the ways I tried to install it. I'm wondering if an additional part broke off and got lost.
Thanks.
Snowthrower stopped throwing snow. Opened up the side of the machine the belt is on. Belt had no tension. Spring was unattached at one end. Belt tensioner was loose. I don't see how the spring would be attached to provide sufficient tension to the belt. It seems to not fit properly in the ways I tried to install it. I'm wondering if an additional part broke off and got lost.
Thanks.
#2
Possibly you can view and find what you need here.
http://www.searspartsdirect.com/part...sid=PDVertical
Mike NJ
http://www.searspartsdirect.com/part...sid=PDVertical
Mike NJ