older ariens snowblower 7hp engine will not go into forward gears


  #1  
Old 01-13-11, 07:50 PM
D
Member
Thread Starter
Join Date: Jan 2011
Location: usa
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
older ariens snowblower 7hp engine will not go into forward gears

older ariens snowblower 7hp engine will not go into forward gears. it will go reverse. it has linkage underneath that goes left to right, it only goes right. please help or advise thanks, dan
 
  #2  
Old 01-15-11, 01:48 PM
Join Date: Aug 2010
Location: NH Seacoast
Posts: 93
Upvotes: 0
Received 0 Upvotes on 0 Posts
are the gears attached to the engine or to to a rubber wheel underneath the engine?
 
  #3  
Old 01-15-11, 03:43 PM
S
Member
Join Date: Mar 2009
Location: USA
Posts: 583
Upvotes: 0
Received 1 Upvote on 1 Post
The old Areans

That part of the mechanism that slides on a shaft, might just need a shmere of grease or a drop of oil, careful, do not get any on the rubber disc or the drive plate. As you try to move the speed assembly left and right, or back and forth, try to see if anything is banging into each other or otherwise binding. It's a fairly simple device, and it should be easy to figure out.
Sid
 
  #4  
Old 01-15-11, 03:51 PM
S
Member
Join Date: Mar 2009
Location: USA
Posts: 583
Upvotes: 0
Received 1 Upvote on 1 Post
The old Areans

I'm sorry, I did'nt answer the question, Usualy the motor is attched to the steel plate and the rubber disc is attched to the gears,sprokets, and the wheels.
Sid
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: