carburetor float adjustment specifications
#1
Member
Thread Starter
Join Date: Apr 2011
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
carburetor float adjustment specifications
I need adjustment specs for Tecumseh #631923 carburetor float
#2
It would help to have the engine model number,
The height for the float on most Tec carbs is 11/64 between the carb base and the float, I use a 3/16 drill bit which is 12/64. Have a good one. Geo
The height for the float on most Tec carbs is 11/64 between the carb base and the float, I use a 3/16 drill bit which is 12/64. Have a good one. Geo