No pressure- pressure washer

Reply

  #1  
Old 04-06-11, 03:16 PM
Member
Thread Starter
Join Date: Apr 2011
Location: USA
Posts: 1
No pressure- pressure washer

I have a 6hp 2300 psi 2.0 gpm craftsman gas powered pressure washer 5 plus years old. It has always performed flawlessly until about a month ago; it starts first pull but gas no pressure.I checked both water lines and pressure nozzle but-I don't know. Any ideas
 
Sponsored Links
  #2  
Old 04-07-11, 07:10 AM
Member
Join Date: Mar 2009
Location: USA
Posts: 628
No pressure

Check the presasure adjustment valve, it may be stuck, or have stuff under the seat. Also make shure before you start it, hold the gun valve open long enough to get all the air out.
Sid
 
  #3  
Old 04-08-11, 07:53 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,822
Good suggestions.

Often times the unloader valve gets stuck, causing this problem.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes