Toro Model 20018 wont stop running after releasing cable break

Reply

  #1  
Old 05-24-11, 06:51 AM
Member
Thread Starter
Join Date: May 2011
Location: United States
Posts: 2
Toro Model 20018 wont stop running after releasing cable break

I have a Toro model 20018 22" Recycler mower. It takes a minute a two for it to stop after I release the brake handle. Is there an adjustment or maybe I need a new cable ? Any insight would be helpful.

Thanks:
 
Sponsored Links
  #2  
Old 05-24-11, 08:26 AM
BFHFixit's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Jun 2007
Location: USA.
Posts: 1,836
Disconnect the cable at both ends and see if it moves freely inside the housing...if not, then a new cable might be warranted.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes