Pressure Washer problem.

Reply

  #1  
Old 06-06-11, 10:56 AM
Member
Thread Starter
Join Date: Nov 2010
Location: USA
Posts: 7
Pressure Washer problem.

I have a Karcher pressure washer with a Tecumseh engine. It recently has developed a low pressure spray and the engine runs fine. I removed the four bolts for the pump itself to see if maybe there were any worn parts or clogged filters/screens. There were none. When I reinstalled the pump and tightened the screws I noticed that I cant pull the starter rope. I loosened the bolts and it frees up so I can pull the rope. Thing is i have to have them tight so it doesn't leak oil. Maybe there is a special way to put it back together..I cant really see it though. Any ideas guys?
 
Sponsored Links
  #2  
Old 06-06-11, 07:31 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Kind of hard to tell... there are a zillion different models and yours could be any one of them. Sounds like it's not put together right.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes