Toro Self Propelled not self propelling

Reply

  #1  
Old 07-09-11, 09:38 AM
Member
Thread Starter
Join Date: Jul 2011
Location: usa
Posts: 1
Toro Self Propelled not self propelling

My 1996 Toro rear bagger self propell is not working. I took both rear wheels off and the shaft is spinning but the gears at the end of the wheels are not. I looked at the keys which are flush with the shaft, meaning to me they are worn but looking at the picture in the manual they look to be not much bigger than the ones I took out. Could there be another problem?
 
Sponsored Links
  #2  
Old 07-09-11, 10:24 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,821
Take the keys out. There should be a spring under the keys that keeps them pushed up. Clean these parts, lube and put them back in place, making sure the keys do not stick.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes