DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Outdoor Gasoline and Electric Powered Equipment and Small Engines

MTD Tiller

Thread Tools

Search this Thread

08-17-11, 06:13 PM

musty1121

Member

Thread Starter

Join Date: Aug 2011

Location: USA

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

MTD Tiller

I have a vintage MTD tiller. The model number is 215 385 z. It is a Briggs and Stratton Engine, I believe a 5 HP. I need a new carb or this one rebuilt. The rest of the tiller is in good shape. Any help out there??

Upvote

08-17-11, 07:39 PM

goldstar

Member

Join Date: Oct 2002

Location: Hamilton County, Ohio

Posts: 3,927

Upvotes: 0

Received 2 Upvotes on 2 Posts

What is your question?

If you feel that you need a new carb, head to the nearest mower service center. Pull the carb and take it with you. They will have parts for a re build and possibly a new carb. Briggs is a very popular engine.

Upvote

08-17-11, 07:47 PM

geogrubb

Member

Join Date: Jun 2006

Location: United States

Posts: 2,277

Upvotes: 0

Received 28 Upvotes on 27 Posts

Post the engine model, type and code which is stamped in the metal engine shroud by the spark plug and someone will know what you need. Have a good one. Geo

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Outdoor Gasoline and Electric Powered Equipment and Small Engines
tecumseh 10 HP engine ( on an ariens snow blower)

N

nitroiver on Aug 17, 2011

hey guys:) i've just got hold on a used snowblower, and trying to get it to run smoothly before winter arrives here:). now the questions,... it starts and runs,, but ONLY at full throttle,, i've been googling as a maniac to find some repairbooks for the engine, but lucked out. any of you able to help with either some easy tips on what to check first,, or where to find a service manual and maybe somewhere to figure out the idle and/or ful throttle screw adjustments?? thanx in advanced from a frustraded norwegian:):)Read More
Outdoor Gasoline and Electric Powered Equipment and Small Engines
UK Tecumseh bvs mower needs ID and carb adjusting

B

benawhile on Aug 18, 2011

Hello I have a UK bought Mountfield Empress 16 mower with a Tecumseh BVS R 153 engine with some Italian words printed in various places, like on the carb float. There is a four position hand control, Choke, Fast/Hare, Slow/Tortoise, Stop. There is no primer pump. THe problem was it would only run on full choke, so I took apart the carb and found muck in it, cleaned out and cleaned the fuel tank. At first it wouldn’t run any better, so I tried changing the carb settings, which were disturbed anyway when I took off the carb. I don’t know if I made any difference, but suddenly it started to run OK. I have not been able to find a manual for this, and from some old US Tec sites still in existence I cannot be sure if there is a different US number for this engine. One old US Tecumseh website doesn’t list any BVS model number. Full number on the engine plate seems to be BVS R 153 ES E-41007B and another 6 digit number which is"3 8 or S"93"4?"1D Although it seems to run OK, what I would like to know is how to adjust the carb settings properly. The linkage and control mounting plate is adjustable relative to the carburettor body, as the screw holes in the plate are slotted to allow a quarter to half inch movement backwards and forward. There are two throttle stops, one to limit the opening and one to limit the closure. I don’t see why the closure would be limited, surely the engine would stop if the throttle were fully closed only, or doesn’t it work like that? There is another adjustment screw in the side of the carb body, which reminds me of an idle air bleed screw from my old Zenith auto carbs. It seems to affect running speed. I would like to get a manual but don’t know how to cross reference to get the US model number. If the manual is unavailable, what is the correct way to adjust these and is there anything else I should know?Read More

Ask a Question