bolens gas trimmer

Reply

  #1  
Old 09-28-11, 12:51 PM
Member
Thread Starter
Join Date: Jan 2005
Location: southeast pennsylvania
Posts: 265
bolens gas trimmer

I have a Bolens gas trimmer, Model BL110, and I am having trouble with the cutting head. There is a cable that runs from the motor to the cutting head and it keeps slipping out and therefore the head won't spin. I've had it apart three times and each time when I start it the cable again comes out. Any ideas what could be causing it? Could there be a missing part somewhere? It's the first time I had it apart other than changing the cutting cord.
 
Sponsored Links
  #2  
Old 09-28-11, 05:18 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Loosen the clamp that holds the boom to the engine and slide it into the engine more. It has slipped out enough to disengage the cable.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes