Brain freeze on a 2 cycle engine

Reply

  #1  
Old 12-09-11, 06:09 AM
Member
Thread Starter
Join Date: Dec 2009
Location: bond county illinois
Posts: 170
Brain freeze on a 2 cycle engine

I'm putting back a cylinder and piston on a 2 stroke mcculough saw and forgot to mark which way the piston was in originally. There is a hole in the piston and don't remember if that should go toward the exhaust port? Any help would be appreciated
 
Sponsored Links
  #2  
Old 12-10-11, 10:41 AM
CAMINO KID's Avatar
Member
Join Date: Mar 2007
Location: Southern Wisconsin
Posts: 354
If memory serves me right, since I nolong have any of the manuals, it goes towards the exhaust port.
 
  #3  
Old 12-11-11, 09:42 AM
Member
Thread Starter
Join Date: Dec 2009
Location: bond county illinois
Posts: 170
thanx, Camino.I did it that way and it worked fine. Appeciate the response.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes