Tecumseh Carburetor and Govenor linkage routing

Reply

  #1  
Old 06-01-12, 06:47 PM
Member
Thread Starter
Join Date: Jun 2012
Location: USA
Posts: 2
Tecumseh Carburetor and Govenor linkage routing

I purchased a 5hp Craftsman Chipper Shredder that would not stay running. Although the carburetor is non-adjustable, the previous owner had tampered with the settings and I suspected that to be the reason for the problems. I purchased a new carburetor and when I went to swap them out, I have a feeling that the linkage to the carburetor and govenor are incorrectly routed. The engine is a Tecumseh model OHH50-68001A. The carburetor is a 640035C. Any help would be greatly appreciated.
 
Sponsored Links
  #2  
Old 06-02-12, 04:37 AM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,263
Hello Bill,


You can download a service manual for your engine HERE, In it will be the different linkage configurations.


Good Luck
 
  #3  
Old 06-02-12, 02:22 PM
Member
Thread Starter
Join Date: Jun 2012
Location: USA
Posts: 2
Thanks for the link. I'll give that a try.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes