:alarm: Hi, Guys, I'm back again for your help. I have a pressure washer with a 5.5 HP Honda engine. It wouldn't start for me, so in doing a run-down on what the problem could be, I found a LOT of gasoline in the engine oil. I changed the oil and started over, trying to start the unit. No luck. After 30 or so pulls, I inspected the oil and found gas in it, AGAIN. Someone suggested there might be trash in the carb, so I pulled the gas tank, cleaned it and the gas line. I inspected the carb for crud and found only a small amount of grit in the carb bowl. Before I ruin more oil and run the risk of blowing a gasket (mine), what else should I check? As always, your help is tremendously appreciated. You guys are the BEST. Nancy

I have a Pou8lan Pro 4218 chain saw with the tool-less chain adjustment. This setup is junk and the chain keeps loosening after just a small amount of cutting. What other model has a bolt down cover that I can replace the original with