Honda gcv160 carb assembly
#1
Member
Thread Starter
Join Date: Sep 2012
Location: USA
Posts: 5
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Honda gcv160 carb assembly
I have a Honda gcv 160 on a power washer. I took the carb off to clean it. Unfortunately i didnt pay close attention while removing it and i can not figure out how to re-assemble it to the motor. The main problem is i cannot tell where the air guide goes. If anyone can provide any info. or a good pic (i have check the internet with no luck) i would greatly appreciate it. Thanks
#2
Group Moderator
#3
Member
Thread Starter
Join Date: Sep 2012
Location: USA
Posts: 5
Upvotes: 0
Received 0 Upvotes
on
0 Posts
thanks for the pic , it appears to be #12, however the one i am dealing with looks a little different, i am sure it serves the same purpose. So if i am looking at this correctly,#12 goes between the carb and the engine itself? Thanks