Lawn mower


  #1  
Old 06-19-13, 04:01 PM
F
Member
Thread Starter
Join Date: Mar 2013
Location: USA
Posts: 15
Upvotes: 0
Received 0 Upvotes on 0 Posts
Lawn mower

While mowing with my walk behind Toro rear wheel drive two brackets came out from under neath. Now it is a push mower instead of a propelled mower. Can not see where they came from. Know that it had to be somewhere on the back wheels. Anyone got any help?
 
  #2  
Old 06-19-13, 04:42 PM
J
Banned. Rule And/Or Policy Violation
Join Date: Apr 2013
Location: USA
Posts: 3,860
Upvotes: 0
Received 1 Upvote on 1 Post
No pictures, no model # how would anyone know where it goes?
I'd bet if you went on the Toro web site and brought up the parts break down you could figure it out.
 
  #3  
Old 06-19-13, 08:57 PM
M
Member
Join Date: Oct 2011
Location: USA
Posts: 373
Upvotes: 0
Received 0 Upvotes on 0 Posts
Good point Joe,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
 
  #4  
Old 06-20-13, 06:21 PM
F
Member
Thread Starter
Join Date: Mar 2013
Location: USA
Posts: 15
Upvotes: 0
Received 0 Upvotes on 0 Posts
I did that and did not show the rear drive, but the model is a Toro 22 inch cut GTS walk behind. Model 20017 Serial 250047545 Thanks for your comments
 
  #5  
Old 06-20-13, 06:33 PM
M
Member
Join Date: Oct 2011
Location: USA
Posts: 373
Upvotes: 0
Received 0 Upvotes on 0 Posts
Here is link from Toro site,,,,,,,,,Toro |
It should show you how and where those brackets go. A description of brackets would be helpful.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: