craftsman snowblower 8 and 26

Reply

  #1  
Old 12-10-13, 05:09 AM
Member
Thread Starter
Join Date: Nov 2013
Location: L3V4J6
Posts: 4
craftsman snowblower 8 and 26

Hi Guys. Not sure I,m doing this right, but if not, sorry. To continue the saga of my snowblower. I finally got the right belts ( Sears Canada) and replaced them along with a new auger bearing, a new friction wheel and a carb rebuild. Runs great. Now my new problem. When I put it into forward the rubber on the friction wheel comes off. Can anyone enlighten me as to what might be wrong. I know the wheel was on the right way. Thanks
 
Sponsored Links
  #2  
Old 12-10-13, 06:30 AM
Member
Join Date: Mar 2009
Location: USA
Posts: 628
The Craftsman

There might be too much pressure on the disk, see if the tension on the disk [clutch] is adjustable, it should be just enough to drive the machine. I never liked those vulcanized rubber disks, Murray made a solid rubber disk on my 47 year old machine.
Sid
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes