click when turning key, replaced solenoid, intermittent problem, craftsman 42"
#1
Member
Thread Starter
Join Date: Jun 2007
Posts: 14
Upvotes: 0
Received 0 Upvotes
on
0 Posts
click when turning key, replaced solenoid, intermittent problem, craftsman 42"
hi
i have a craftsman 42" cut mower, the mower quit starting and would only click at solenoid, i replaced the solenoid and now the mower turns now and then and the other time i get the same click, any suggestions.
thanks
i have a craftsman 42" cut mower, the mower quit starting and would only click at solenoid, i replaced the solenoid and now the mower turns now and then and the other time i get the same click, any suggestions.
thanks
#2
I thought I responded, but it didn't take. Have you checked the charge rate on the battery? Not just the voltage, but under load? Your battery may be too weak.