craftsman power washer

Old 07-08-14, 05:52 PM
Thread Starter
Join Date: Jul 2014
Location: usa
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
craftsman power washer

pump manifold cracked, replaced w/new one & replaced ck valves.

no pressure just a stream of water out of nozzle

water also shooting out of chemical injector line which it never did before

worked perfect before manifold cracked

any ideas what it the problem could be ?

thx, mike
Old 07-08-14, 06:44 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,027
Received 152 Upvotes on 139 Posts
Sounds like the unloader valve is stuck and the ball and or spring in the injector nozzle is stuck or missing.

Thread Tools
Search this Thread
Ask a Question
Question Title: