Craftsman Push Lawn Mower revs too high

Reply

  #1  
Old 07-25-14, 05:30 AM
Member
Thread Starter
Join Date: Jul 2014
Location: USA
Posts: 1
Craftsman Push Lawn Mower revs too high

I recently was cutting grass with no issues with my Craftsman lawn mower with a Briggs and Stratton engine when it died on me. I added gas but it still did not start. I tried several things and eventually it kicked over but quickly died.

I read through several places and decided to replace the spark plug, air filter and choke spring thinking that may be the cause. Well, now it runs way too high. The choke acts like it is stuck open. I can flip it and it would barely run. I have a new spring on the choke but it acts like the choke is either stuck open or closed.

I am sure this is a simple fix but need some guidance.... help!
 
Sponsored Links
  #2  
Old 07-25-14, 09:40 AM
Member
Join Date: Jun 2006
Location: St. Louis
Posts: 2,365
Please post the engine model, type and trim someone will get you going. have a good one. Geo
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes