i just bought this snowblower: i took the jet off under the float bowl, the smallest hole on the jet was clogged i cleaned it with carb cleaner and poked it with a needle. but when i went to put the bowl back on it doesnt hold the fuel, it starts to leak out.... does it matter which way the bowl goes cause i noticed one side of the bowl is deeper than the other? also whats this wire hanging seems an old feature to start? also where do i find the model of the motor? [url=http://postimg.org/image/98frk52cd/][/url] [url=http://postimg.org/image/4p3iymkgt/][/url] [url=http://postimg.org/image/m67mtql99/][/url] [url=http://postimg.org/image/588m7wbvh/][/url]

I have a Tecumseh 10 hp generator. it fires and runs few seconds then quits. I have tried carb spray, no help. I have changed gas, filter, cleaned carb. even replaced carb. it does same thing. there is gas in bowl. it won't fire till it has set for five minutes. it does have good spark. could intake valve be sticking? stumped,,