Briggs and Stratton Vanguard 386777 Type- 0114E1


  #1  
Old 09-04-14, 01:47 PM
Omega3's Avatar
Member
Thread Starter
Join Date: May 2014
Location: USA
Posts: 11
Upvotes: 0
Received 0 Upvotes on 0 Posts
Briggs and Stratton Vanguard 386777 Type- 0114E1

Cheese,

Can you help me out with the crankshaft size on this one also. I can't seem to find them. Is there somewhere online to find this.
 
  #2  
Old 09-04-14, 03:22 PM
G
Member
Join Date: Jun 2006
Location: United States
Posts: 2,296
Upvotes: 0
Received 31 Upvotes on 29 Posts
Scroll to the bottom of the link provided for crankshaft drawings. Have a good one. Geo

https://www.smallenginesuppliers.com...ine-specs.html
 
  #3  
Old 09-05-14, 11:26 AM
Omega3's Avatar
Member
Thread Starter
Join Date: May 2014
Location: USA
Posts: 11
Upvotes: 0
Received 0 Upvotes on 0 Posts
I don't see a vertical drawing for this one though. 386777 Type. Or I just could be absolutely blind.lol
 
  #4  
Old 09-05-14, 09:34 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 15,972
Received 142 Upvotes on 131 Posts
It takes a number 809841 crankshaft. I'm not sure what shaft size that is. I think I have the info on a microfiche, but I don't have a microfiche reader set up anymore. Maybe it's in a manual somewhere, I'll have to look.
 
  #5  
Old 09-05-14, 09:44 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 15,972
Received 142 Upvotes on 131 Posts
Found it, it's 1 1/8" and about 3" long with a step down from 1 1/4 to 1 1/8 about 3/4 to 1 inch down the shaft.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: