How to remove the choke plate on Walbro - Briggs LMT

Reply

  #1  
Old 11-02-14, 09:01 PM
Member
Thread Starter
Join Date: Oct 2013
Location: USA
Posts: 72
How to remove the choke plate on Walbro - Briggs LMT

The choke plate is not held by screws as is the throttle plate. I'm just trying to learn and don't want to tare something up. I've searched the net but found no help. Had hoped for an illustration or a youtube video. No such luck.

Anyone kind enough to try and talk me through this? A friend gave me what is supposed to be a good carb. But it's missing both the throttle and choke assembly. I had hoped to use the choke assembly from my junk Walbro. The throttle assembly was a walk in the park. But the choke has me beat till I can get some info. The choke plate is metal not plastic. If that helps.

THanks in advance.
 

Last edited by ih4630; 11-02-14 at 10:39 PM.
Sponsored Links
  #2  
Old 11-02-14, 10:29 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Grab the choke plate with some pliers and pull it out. It just snaps in there.
 
  #3  
Old 11-04-14, 10:08 PM
Member
Thread Starter
Join Date: Oct 2013
Location: USA
Posts: 72
Just a thank you to cheese for the education.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes