Craftsman motor will not staet
#1
Member
Thread Starter
Join Date: Jul 2015
Location: usa
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Craftsman motor will not staet
I have a Craftsman riding mower. It has been running OK until yesterday, it started running rough so I put away until I could get some more gas. After putting the new gas in the mower wouldn't start. The moter is a craftsmsn 15.5 hp ohc. I have gas flow to the new fuel filter and it turns over ok but will not start. Any suggestions?
#2
I often start by pulling the spark plug and checking to see if it has been fouled; then evaluate whether it has been flooded; then check for a good spark.
Since you mention a "new" fuel filter . . . . has it run since that was installed ?
Since you mention a "new" fuel filter . . . . has it run since that was installed ?