Stihl FS 80 starts but won,t stay running


  #1  
Old 07-14-15, 11:21 AM
P
Member
Thread Starter
Join Date: Jan 2009
Location: Ottawa Canada
Posts: 68
Upvotes: 0
Received 0 Upvotes on 0 Posts
Stihl FS 80 starts but won,t stay running

I can start the engine but it stops with in 60 seconds unlessI keep pumping the gas bulb.
When I open the throtle the engine dies
The Stihl distributer says that the carb kit for this model is no longer avalible
Does any one know of where I can get a after market kit for this model the number on the carb is 3D10NB
 
  #2  
Old 07-14-15, 12:50 PM
G
Member
Join Date: Jun 2006
Location: United States
Posts: 2,296
Upvotes: 0
Received 31 Upvotes on 29 Posts
Find the L jet screw and turn 1/4-1/4 counter clockwise might help

Here are the carbs for your trimmer, no 3D10NB listed, however this is from an older manual, you might find one on ebay or amazon rather than rekitting yours. Have a good one. Geo

Carburetor C1Q-S63A ................................................................ 6
F Carburetor C1Q-S78 BR ............................................................. 7
G Carburetor C1Q-S56 ................................................................... 8
H Carburetor C1Q-S60 BR ............................................................. 9
J Carburetor C1Q-S45 ................................................................. 10
K Carburetor C1Q-S28D, C1Q-S41A ........................................... 11
L Carburetor WT-447 ................................................................... 12
M
 
  #3  
Old 07-17-15, 02:07 PM
P
Member
Thread Starter
Join Date: Jan 2009
Location: Ottawa Canada
Posts: 68
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thanks Geo

I Will try to find one of these carbs. On eBay

Thank you
 
  #4  
Old 07-17-15, 08:13 PM
G
Member
Join Date: Jun 2006
Location: United States
Posts: 2,296
Upvotes: 0
Received 31 Upvotes on 29 Posts
Zamacarb.com has a lot of info about their carbs, also walbro.com has good info also. Zama is owned by Stihl. Have a good one. Geo
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: