DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Outdoor Gasoline and Electric Powered Equipment and Small Engines

Homelite weed wacker

Thread Tools

Search this Thread

07-18-15, 12:40 PM

Geochurchi

Member

Thread Starter

Join Date: Nov 2012

Posts: 5,012

Upvotes: 4

Received 158 Upvotes on 144 Posts

Homelite weed wacker

Hi All , what is the availability of the drive shaft cable for a UT 20677. S/N 3060420 weed wacker?
Thanks
Geo

Upvote

07-18-15, 02:05 PM

joecaption

Member

Join Date: Jan 2011

Location: USA

Posts: 4,461

Upvotes: 245

Received 126 Upvotes on 111 Posts

Google the make model # and and add parts after that.

Upvote

07-18-15, 02:09 PM

chandler

Banned. Rule And/Or Policy Violation

Join Date: Dec 2005

Location: USA

Posts: 36,608

Upvotes: 0

Received 9 Upvotes on 8 Posts

I should think this would work on the trimmer. It is bent shaft, right? Homelite String Trimmer Drive Shaft UP00710A Order now for same day shipping. 365 day return policy. RepairClinic.com

Upvote

07-18-15, 06:08 PM

Geochurchi

Member

Thread Starter

Join Date: Nov 2012

Posts: 5,012

Upvotes: 4

Received 158 Upvotes on 144 Posts

That would probably work but I was hoping for just the cable, I think I will scrap that idea and try and sell the motor section, it's in good shape.
Thanks
Geo

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Outdoor Gasoline and Electric Powered Equipment and Small Engines
Echo PB500H Backpack Blower

J

jsouth on Jul 17, 2015

I'm working on this blower,I cannot get it to run off choke.I have clean the carb. 4 times in my ultrasonic cleaner.I have put a new carb. kit,replaced the fuel lines and filter.I have good compression 150#.I have took the muffler off and the spark arrester screen is fine.The exhaust port also is clean.The carb. on this machine is a walbro WLA.It has 2 very small holes where the needle adjustment screws are.Has anybody ever work on one of these carbs.I have worked on many 2 cycle carbs.,this is my first of this kind to work on.If I could find a way to turn these adjustment screws.I think the blower would run.No air leak,that I could tell.I appreciate any input.I priced a new carb. on ebay they sell for $88.00.Sorry for the long post. Thanks, Jerry:confused:Read More
Outdoor Gasoline and Electric Powered Equipment and Small Engines
Kohler Command valve cover leaking

H

hoosierdaddy58 on Jul 18, 2015

Hi, I am working on a John Deere LT160 with a Kohler Command engine. Engine model number is CV460S. When I got it, the valve cover had been leaking for some time. Pulled the valve cover off, cleaned the surfaces on the head and the valve cover very well. Put a bead of Ultra Black RTV sealant on the valve cover and installed. Started it after it dried, but still leaked at the bottom. Realized that when I installed the valve cover that the cylinder head let oil come in contact with the wet sealant. Cleaned the surfaces again and put a good bead of sealant on the valve cover and installed. This time I jacked up the front of the tractor to keep the cylinder head oil from getting to the wet sealant. I let it sit up for 20 hours to make sure it was dry. Started it up and still getting a drip of oil from the bottom of the valve cover. I wish that Kohler had put gaskets on these. Any other ideas to stop the leak? Thank youRead More

Ask a Question