16hp simplicity
#1
Member
Thread Starter
16hp simplicity
What is the value clearance on a briggs 16hp model 1692112 gth . I've tried adjusting them at least 10 times and have no luck
#3
Member
Thread Starter
Hi cheese model # is 303777 how do I know when to set the value.I keep trying but the engine still turns over hard
#5
Correct, and be sure it's on the compression stroke, not the exhaust stroke.
.005" is good for both valves on that engine.
.005" is good for both valves on that engine.
#7
Member
Thread Starter
Still having problems! Is the intake on top or bottom I'm guessing Top. Hear is what i'm doing first intake open then the exhaust when it comes up to top dead center I adjust the values. then I even tried the other top dead center no matter what it sounds like it pinging starts hard
#8
Member
You want both valves closed to have the compression stroke. Then 1/4 past TDC and set clearances.
#9
I suggest watching some you-tube videos about how to find TDC and how to adjust the valves. Getting it wrong can cost you internal engine problems.
#10
Member
Join Date: Aug 2015
Location: USA
Posts: 198
Upvotes: 0
Received 0 Upvotes
on
0 Posts
video