Craftsman snowblower-oil coming out breather


  #41  
Old 10-29-15, 05:04 PM
B
Member
Thread Starter
Join Date: Aug 2015
Posts: 53
Upvotes: 0
Received 0 Upvotes on 0 Posts
Yes, i have rochester lawn equiprment near by. I may swng in this weekend and see what they can do.
 
  #42  
Old 10-29-15, 05:09 PM
B
Member
Thread Starter
Join Date: Aug 2015
Posts: 53
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thanks for the video geo. ill probably try to replace the breather. I'll also ask if the little grommet goes to anything.
 
  #43  
Old 11-02-15, 02:24 PM
B
Member
Thread Starter
Join Date: Aug 2015
Posts: 53
Upvotes: 0
Received 0 Upvotes on 0 Posts
So i took the breather off today and found the gasket was warped and twisted. That makes scence because if it wasnt creating a seal and wasnt creating a vacuume, the breather wouldnt seal. 😀 Ill buy a new one tomorrow
 
  #44  
Old 11-02-15, 02:58 PM
V
Member
Join Date: Jan 2010
Location: North East Kingdom of Vermont
Posts: 2,195
Upvotes: 0
Received 2 Upvotes on 2 Posts
Yipes . . . . I thought it was the Gasket back in Post #34 !

So, what did Rochester Lawn Equipment have to say about the absence of a tube ?

Is it possible someone put a totally different carburetor on this unit ?
 
  #45  
Old 11-03-15, 02:51 PM
B
Member
Thread Starter
Join Date: Aug 2015
Posts: 53
Upvotes: 0
Received 0 Upvotes on 0 Posts
Rochester lawn equipment said the breather tube is supposed to be like that. I put the new gasket on and it doesn't spit oil anymore. Thanks vermont and everyone else!
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: