Throttle linkage for 8 HP Tecumseh snow thrower
#1
Member
Thread Starter
Join Date: Jan 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Throttle linkage for 8 HP Tecumseh snow thrower
I have a 536.886280 craftsman 8 horsepower 26" snow thrower, Tecumseh carb and need throttle linkage help. All info I see shows 2 throttle linkages and I have 3. I need help placing all three linkages. Thank you, Garry
#5
Member
The picture that I posted should be your setup. The extra link & spring must come from some other machine.
#6
Member
Thread Starter
Join Date: Jan 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Nope, came from this machine.
The only project I am working on is this snowblower. I am usually very methodical about reverse engineering. I put bolts back in the same hole for later assembly, etc. however, when I removed the carb, the linkages all come off before I made any notes. The three linkages are from this machine.