Troybilt horse tiller

Thread Tools

Search this Thread

03-18-16, 07:46 AM

Loose Dirt 101

Member

Thread Starter

Join Date: Mar 2016

Location: USA

Posts: 3

Upvotes: 0

Received 0 Upvotes on 0 Posts

Troybilt horse tiller

Need help finding parts. I have serial# but can't figure out model.it has techumseh engine.

Upvote

03-18-16, 08:04 AM

Wirepuller38

Member

Join Date: Feb 2006

Location: USA

Posts: 6,345

Upvotes: 1

Received 60 Upvotes on 52 Posts

Parts

http://www.troybilt.com/equipment/tr...View=all-parts

Upvote

03-18-16, 08:47 AM

CarbideTipped

Member

Join Date: May 2015

Location: USA

Posts: 2,982

Upvotes: 2

Received 107 Upvotes on 86 Posts

Is this the "new" troybilt, or the original troybilt?

Upvote

03-18-16, 03:09 PM

Loose Dirt 101

Member

Thread Starter

Join Date: Mar 2016

Location: USA

Posts: 3

Upvotes: 0

Received 0 Upvotes on 0 Posts

Just want to say thanks

I have been looking for parts for a while and your link nailed it.Now I know where to find all my troybilt parts.This sight is fantastic.

Upvote

03-18-16, 03:12 PM

Loose Dirt 101

Member

Thread Starter

Join Date: Mar 2016

Location: USA

Posts: 3

Upvotes: 0

Received 0 Upvotes on 0 Posts

It's an old one between 1978 & 1981.

Upvote

03-19-16, 08:06 AM

Wirepuller38

Member

Join Date: Feb 2006

Location: USA

Posts: 6,345

Upvotes: 1

Received 60 Upvotes on 52 Posts

Parts

Quote:

I have been looking for parts for a while and your link nailed it.Now I know where to find all my troybilt parts.This sight is fantastic.

Glad we could help. Good luck with your project.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Outdoor Gasoline and Electric Powered Equipment and Small Engines
Briggs and Stratton carb # 798758 problems

P

povertyacresmyk on Mar 13, 2016

I believe the gas had some dirt and water in it when my son used it last. It will only start when you pour gas in the carb. then quickly dies. I removed the carb and cleaned screens. Cleaned the areas where the screen sat. I removed the pick up. I can blow through it but only when its not attached to the carb. The primer bulb when pressed stays pressed in so I assume there's a clog somewhere? Diaphrams appear intact and flexable. I tried an air compressor on the holes. Any suggestions other than a new carb?
Outdoor Gasoline and Electric Powered Equipment and Small Engines
Troy Bilt pressure washer keeps stalling until warm.

W

watsonja4 on Mar 16, 2016

I have a 3000psi pressure washer made by Troy-Bilt with a Horizontal Briggs and Stratton motor. The problem I am having is it cranks and runs but stalls after a short time while cold. After the motor gets hot it runs perfect. So what could cause this, carb, valves, spark? I'm so confused on what this things problem is since usually my small engines either run perfect or not at all. Any help is greatly appreciated and if you need more details or info let me know.