Carburetor rebuild question
#1
08-03-16, 04:25 PM
Carburetor rebuild question
I have a Husqvarna Hedge Trimmer with a Zama W4 carb on an 18CC 2 cycle engine. The unit is 20 yrs old and I suspect it needs a carb. rebuild.
I'm fairly handy but have never done a project like this.
How difficult is it to tear down one of these little carbs, rebuild and adjust?
Thanks for any feedback.
I'm fairly handy but have never done a project like this.
How difficult is it to tear down one of these little carbs, rebuild and adjust?
Thanks for any feedback.
#2
08-03-16, 04:34 PM
Group Moderator
#3
08-03-16, 04:35 PM
Banned. Rule And/Or Policy Violation
Join Date: Jun 2007
Location: USA.
Posts: 1,835
Upvotes: 0
Received 0 Upvotes
on
0 Posts
It's not that hard but with that age and a new carb likely only double the price of a kit, and the chances the rebuild not taking, I would price a new carb for it.
#4
08-03-16, 05:20 PM
Thanks for the replies. I initially was planning on replacing but few places carry the replacement and it runs $55-60. I may have to bite the bullet.
Last edited by krawfo; 08-03-16 at 06:00 PM.
