Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

shindaiwa edger


stanj's Avatar
Member

Join Date: Dec 2011
Posts: 94
MD

08-14-16, 11:53 AM   #1  
shindaiwa edger

I am looking to sale my LE230 edger on a local town site.

I purchased it back in about 2005.

It needs a new blade and a tune up but other than that it is in good shape.

About what price should I ask for the edger?

thanks

 
Sponsored Links
chandler's Avatar
Banned. Rule And/Or Policy Violation

Join Date: Dec 2005
Posts: 39,968
GA

08-14-16, 12:04 PM   #2  
Difficult to tell. Why not look on auction sites with your model number and see what they are going for. Are you going to replace the blade and do a tune up on it? Or sell it as is?

 
joecaption's Avatar
Member

Join Date: Jan 2011
Posts: 3,963
VA

08-14-16, 03:58 PM   #3  
If it was working, not all beat up and a new blade you can ask 50% of new and expect to get about 40%.
Not working, worn out blade, it may not sell or your going to get penny's on the dollar.
Anything I'm selling I post on Craig's list.
At least 99% of the time with a small gas powered tool that gets little use like that tool It's a fuel issue and the carb. needs to be replaced or rebuilt.
Change the plug, air filter, oil, rebuild the carb. is what may be concidered a tune up.
A new blade is about $6.00, new carb. about $16.00, may be well worth fixing before selling.

 
stanj's Avatar
Member

Join Date: Dec 2011
Posts: 94
MD

08-24-16, 03:30 PM   #4  
Not sure yet...may do the blade...
if with a tune up a lot may offer less
..it was a $200 product new

 
Search this Thread