Briggs crankshaft diameter

Reply

  #1  
Old 11-15-16, 03:05 PM
Member
Thread Starter
Join Date: Jan 2007
Location: MA
Posts: 514
Briggs crankshaft diameter

If anyone has a Briggs spec sheet and can tell me crank diameter on a 15A114 0342 E1 it would be greatly appreciated
 
Sponsored Links
  #2  
Old 11-15-16, 03:22 PM
BFHFixit's Avatar
Forum Topic Moderator
Join Date: Jun 2007
Location: USA.
Posts: 1,766
If you are asking about the output shaft, it should be 7/8" I believe.
What is it on? going on? coming off of...etc?
 
  #3  
Old 11-15-16, 03:26 PM
Member
Thread Starter
Join Date: Jan 2007
Location: MA
Posts: 514
Sorry I thought the purpose of the forum was to help each other out sorry for the bother
 
  #4  
Old 11-15-16, 03:29 PM
BFHFixit's Avatar
Forum Topic Moderator
Join Date: Jun 2007
Location: USA.
Posts: 1,766
I just asked for a bit more specific info...the IPL does not give dimensions and it depends on what diameter of the crank you are referring to...main journal, rod journal, output shaft, tapered end...???
 
  #5  
Old 11-15-16, 03:52 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,575
The shaft is 3/4" and is 2 3/8" long.

Joe, why the condescending remarks to members? Why does anyone come here for info when they could just as easily go somewhere else? The only reason for them to feel the need to go somewhere else is to avoid attitudes like yours.
 
Reply


Thread Tools
Search this Thread
Display Modes
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 02:36 PM.